diff --git a/pillars/roles/aurpkgs/calendar.sls b/pillars/roles/aurpkgs/calendar.sls index c02ebb1..0a32176 100644 --- a/pillars/roles/aurpkgs/calendar.sls +++ b/pillars/roles/aurpkgs/calendar.sls @@ -1,2 +1,3 @@ -aurpkgs: - baikal: [] +aur: + pkgs: + baikal: [] diff --git a/pillars/roles/aurpkgs/git.sls b/pillars/roles/aurpkgs/git.sls index 51e3a4a..d2b9384 100644 --- a/pillars/roles/aurpkgs/git.sls +++ b/pillars/roles/aurpkgs/git.sls @@ -1,3 +1,4 @@ -aurpkgs: - glide-git: [] - gogs: [] +aur: + pkgs: + glide-git: [] + gogs: [] diff --git a/pillars/roles/aurpkgs/headphones.sls b/pillars/roles/aurpkgs/headphones.sls index 37737bd..1309fbd 100644 --- a/pillars/roles/aurpkgs/headphones.sls +++ b/pillars/roles/aurpkgs/headphones.sls @@ -1,2 +1,3 @@ -aurpkgs: - headphones: [] +aur: + pkgs: + headphones: [] diff --git a/pillars/roles/aurpkgs/icinga.sls b/pillars/roles/aurpkgs/icinga.sls index a555862..c238114 100644 --- a/pillars/roles/aurpkgs/icinga.sls +++ b/pillars/roles/aurpkgs/icinga.sls @@ -1,4 +1,5 @@ -aurpkgs: - icinga2: [] - icingaweb2: [] - icingaweb2-module-director: [] +aur: + pkgs: + icinga2: [] + icingaweb2: [] + icingaweb2-module-director: [] diff --git a/pillars/roles/aurpkgs/jackett.sls b/pillars/roles/aurpkgs/jackett.sls index 831c9ca..a4380ae 100644 --- a/pillars/roles/aurpkgs/jackett.sls +++ b/pillars/roles/aurpkgs/jackett.sls @@ -1,2 +1,3 @@ -aurpkgs: - jackett: [] +aur: + pkgs: + jackett: [] diff --git a/pillars/roles/aurpkgs/lam.sls b/pillars/roles/aurpkgs/lam.sls index dad9ff4..e40878a 100644 --- a/pillars/roles/aurpkgs/lam.sls +++ b/pillars/roles/aurpkgs/lam.sls @@ -1,5 +1,6 @@ -aurpkgs: - ldap-account-manager: [] +aur: + pkgs: + ldap-account-manager: [] # building php56 doesn't seem to work # php56: [] # php56-fpm: [] diff --git a/pillars/roles/aurpkgs/ombi.sls b/pillars/roles/aurpkgs/ombi.sls index 50bf469..b97b19d 100644 --- a/pillars/roles/aurpkgs/ombi.sls +++ b/pillars/roles/aurpkgs/ombi.sls @@ -1,2 +1,3 @@ -aurpkgs: - ombi: [] +aur: + pkgs: + ombi: [] diff --git a/pillars/roles/aurpkgs/pass.sls b/pillars/roles/aurpkgs/pass.sls new file mode 100644 index 0000000..d9b0f1f --- /dev/null +++ b/pillars/roles/aurpkgs/pass.sls @@ -0,0 +1,5 @@ +#note: teampass package is currently broken due to mysql being a required dependency +#will readd if/when the teampass AUR package is fixed +#aur: +# pkgs: +# teampass: [] diff --git a/pillars/roles/aurpkgs/plexmediaserver.sls b/pillars/roles/aurpkgs/plexmediaserver.sls index 36d699f..56633f4 100644 --- a/pillars/roles/aurpkgs/plexmediaserver.sls +++ b/pillars/roles/aurpkgs/plexmediaserver.sls @@ -1,2 +1,3 @@ -aurpkgs: - plex-media-server-plexpass: [] +aur: + pkgs: + plex-media-server-plexpass: [] diff --git a/pillars/roles/aurpkgs/portal.sls b/pillars/roles/aurpkgs/portal.sls deleted file mode 100644 index 8f43531..0000000 --- a/pillars/roles/aurpkgs/portal.sls +++ /dev/null @@ -1,2 +0,0 @@ -aurpkgs: - byobu: [] diff --git a/pillars/roles/aurpkgs/radarr.sls b/pillars/roles/aurpkgs/radarr.sls index 996d392..56fb39d 100644 --- a/pillars/roles/aurpkgs/radarr.sls +++ b/pillars/roles/aurpkgs/radarr.sls @@ -1,2 +1,3 @@ -aurpkgs: - radarr: [] +aur: + pkgs: + radarr: [] diff --git a/pillars/roles/aurpkgs/sonarr.sls b/pillars/roles/aurpkgs/sonarr.sls index dd4cfd5..730b025 100644 --- a/pillars/roles/aurpkgs/sonarr.sls +++ b/pillars/roles/aurpkgs/sonarr.sls @@ -1,2 +1,3 @@ -aurpkgs: - sonarr: [] +aur: + pkgs: + sonarr: [] diff --git a/pillars/roles/backup/gogs.sls b/pillars/roles/backup/gogs.sls new file mode 100644 index 0000000..806cc29 --- /dev/null +++ b/pillars/roles/backup/gogs.sls @@ -0,0 +1,10 @@ +backup: + gogs: + location: /var/lib/gogs/ + rsync_user: backups + key: backups_key + host: host.actcur.com + user: root + group: root + fmode: 600 + dmode: 700 diff --git a/pillars/roles/backup/pass.sls b/pillars/roles/backup/pass.sls new file mode 100644 index 0000000..57b29e2 --- /dev/null +++ b/pillars/roles/backup/pass.sls @@ -0,0 +1,10 @@ +backup: + pass: + location: /teampass + rsync_user: backups + key: backups_key + host: host.actcur.com + user: http + group: http + fmode: 644 + dmode: 700 diff --git a/pillars/roles/database/pass.sls b/pillars/roles/database/pass.sls new file mode 100644 index 0000000..d632d9b --- /dev/null +++ b/pillars/roles/database/pass.sls @@ -0,0 +1,9 @@ +database: + users: + teampass: + host: pass.actcur.com + databases: + teampass: + teampass: + host: pass.actcur.com + grant: all privileges diff --git a/pillars/roles/firewalld/certbot.sls b/pillars/roles/firewalld/certbot.sls index 687ca3e..96dfa89 100644 --- a/pillars/roles/firewalld/certbot.sls +++ b/pillars/roles/firewalld/certbot.sls @@ -1,5 +1,5 @@ firewalld: 70_internal: service: - - http - - https + http: [] + https: [] diff --git a/pillars/roles/firewalld/deluge.sls b/pillars/roles/firewalld/deluge.sls index 807ab30..5ec3ce7 100644 --- a/pillars/roles/firewalld/deluge.sls +++ b/pillars/roles/firewalld/deluge.sls @@ -1,12 +1,11 @@ firewalld: 70_internal: service: - - http + http: [] port: - - 58846/tcp - - 8112/tcp + 58846/tcp: [] + 8112/tcp: [] 99_public: port: - - 63150/tcp - - 63150/udp - + 63150/tcp: [] + 63150/udp: [] diff --git a/pillars/roles/firewalld/git.sls b/pillars/roles/firewalld/git.sls index ec1e02f..13a1e07 100644 --- a/pillars/roles/firewalld/git.sls +++ b/pillars/roles/firewalld/git.sls @@ -1,7 +1,7 @@ firewalld: 70_internal: port: - - 3000/tcp + 3000/tcp: [] 99_public: port: - - 5022/tcp + 5022/tcp: [] diff --git a/pillars/roles/firewalld/gitlab.sls b/pillars/roles/firewalld/gitlab.sls index ba7e47f..04b99cb 100644 --- a/pillars/roles/firewalld/gitlab.sls +++ b/pillars/roles/firewalld/gitlab.sls @@ -1,7 +1,7 @@ firewalld: 70_internal: port: - - 8000/tcp + 8000/tcp: [] 99_public: port: - - 5022/tcp + 5022/tcp: [] diff --git a/pillars/roles/firewalld/mysql.sls b/pillars/roles/firewalld/mysql.sls index ce6d366..a05d7cf 100644 --- a/pillars/roles/firewalld/mysql.sls +++ b/pillars/roles/firewalld/mysql.sls @@ -1,4 +1,4 @@ firewalld: 70_internal: port: - - 3306/tcp + 3306/tcp: [] diff --git a/pillars/roles/firewalld/nginx-proxy.sls b/pillars/roles/firewalld/nginx-proxy.sls index 687ca3e..96dfa89 100644 --- a/pillars/roles/firewalld/nginx-proxy.sls +++ b/pillars/roles/firewalld/nginx-proxy.sls @@ -1,5 +1,5 @@ firewalld: 70_internal: service: - - http - - https + http: [] + https: [] diff --git a/pillars/roles/firewalld/plexmediaserver.sls b/pillars/roles/firewalld/plexmediaserver.sls index cce7f9a..9395b47 100644 --- a/pillars/roles/firewalld/plexmediaserver.sls +++ b/pillars/roles/firewalld/plexmediaserver.sls @@ -1,4 +1,4 @@ firewalld: 99_public: port: - - 32400/tcp + 32400/tcp: [] diff --git a/pillars/roles/firewalld/portal.sls b/pillars/roles/firewalld/portal.sls index 7ee3131..71bb10f 100644 --- a/pillars/roles/firewalld/portal.sls +++ b/pillars/roles/firewalld/portal.sls @@ -1,5 +1,5 @@ firewalld: 99_public: service: - - http - - https + http: [] + https: [] diff --git a/pillars/roles/firewalld/saltmaster.sls b/pillars/roles/firewalld/saltmaster.sls index f9b57ad..2ac6988 100644 --- a/pillars/roles/firewalld/saltmaster.sls +++ b/pillars/roles/firewalld/saltmaster.sls @@ -1,8 +1,8 @@ firewalld: 70_internal: port: - - 4505/tcp - - 4506/tcp + 4505/tcp: [] + 4506/tcp: [] # rule: # salt port 1: # source: 192.168.41.29 diff --git a/pillars/roles/firewalld/server.sls b/pillars/roles/firewalld/server.sls index 2226daa..2b500a0 100644 --- a/pillars/roles/firewalld/server.sls +++ b/pillars/roles/firewalld/server.sls @@ -2,14 +2,14 @@ firewalld: 10_enduser: description: End User zone. Only connections form end users are accepted. include: - - 99_public - - 70_internal + 99_public: [] + 70_internal: [] source: - - 172.16.40.0/24 + 172.16.40.0/24: [] 50_server: description: Server zone. Only connections from servers are accepted. include: - - 99_public - - 70_internal + 99_public: [] + 70_internal: [] source: - - 172.16.41.0/24 + 172.16.41.0/24: [] diff --git a/pillars/roles/firewalld/ssh.sls b/pillars/roles/firewalld/ssh.sls index 25bd61e..c489650 100644 --- a/pillars/roles/firewalld/ssh.sls +++ b/pillars/roles/firewalld/ssh.sls @@ -1,4 +1,4 @@ firewalld: 70_internal: service: - - ssh + ssh: [] diff --git a/pillars/roles/firewalld/sshserver.sls b/pillars/roles/firewalld/sshserver.sls index 72c62ac..8c30263 100644 --- a/pillars/roles/firewalld/sshserver.sls +++ b/pillars/roles/firewalld/sshserver.sls @@ -1,4 +1,4 @@ firewalld: 99_public: service: - - ssh + ssh: [] diff --git a/pillars/roles/firewalld/vpnserver.sls b/pillars/roles/firewalld/vpnserver.sls index a29c505..042879c 100644 --- a/pillars/roles/firewalld/vpnserver.sls +++ b/pillars/roles/firewalld/vpnserver.sls @@ -1,7 +1,7 @@ firewalld: 99_public: service: - - openvpn + openvpn: [] port: - - 1194/udp + 1194/udp: [] masquerade: true diff --git a/pillars/roles/mount/aurrepo.sls b/pillars/roles/mount/aurrepo.sls new file mode 100644 index 0000000..7fe4b30 --- /dev/null +++ b/pillars/roles/mount/aurrepo.sls @@ -0,0 +1,4 @@ +mount: + ext4: + /mnt/build: + device: UUID=090ea2e6-82af-45e7-91e7-84e5967817a4 diff --git a/pillars/roles/nginx/pass.sls b/pillars/roles/nginx/pass.sls new file mode 100644 index 0000000..2b680a2 --- /dev/null +++ b/pillars/roles/nginx/pass.sls @@ -0,0 +1,6 @@ +nginx: + pass: + auth: none + https: + port: 8080 + prot: http diff --git a/pillars/servers/env/server/archpass.sls b/pillars/servers/env/server/archpass.sls new file mode 100644 index 0000000..2fdef9a --- /dev/null +++ b/pillars/servers/env/server/archpass.sls @@ -0,0 +1 @@ +env: prod diff --git a/pillars/servers/maintainer/server/archpass.sls b/pillars/servers/maintainer/server/archpass.sls new file mode 100644 index 0000000..c0b416d --- /dev/null +++ b/pillars/servers/maintainer/server/archpass.sls @@ -0,0 +1,3 @@ +maintainer: + - masaufuku + diff --git a/pillars/servers/roles/server/archpass.sls b/pillars/servers/roles/server/archpass.sls new file mode 100644 index 0000000..d401198 --- /dev/null +++ b/pillars/servers/roles/server/archpass.sls @@ -0,0 +1,7 @@ +grains: + roles: + - server + - ssh + - saltminion + - nginx-proxy + - pass diff --git a/states/grains/init.sls b/states/grains/init.sls new file mode 100644 index 0000000..90da249 --- /dev/null +++ b/states/grains/init.sls @@ -0,0 +1,14 @@ +{# ensure that grains pillar exists -#} +{%- if pillar['grains'] is defined -%} + {%- if pillar['grains']['roles'] is defined %} +set-roles: + grains.present: + - name: roles + - force: true + - value: [{% for role in pillar['grains']['roles'] %}{{role}},{% endfor %}] + {% else %} +set-roles: + grains.absent: + - name: roles + {%- endif -%} +{%- endif -%} diff --git a/states/roles/grains b/states/roles/grains deleted file mode 100644 index edcadfb..0000000 --- a/states/roles/grains +++ /dev/null @@ -1,19 +0,0 @@ -{#- ensure that grains pillar exists -#} -{%- if pillar['grains'] is defined -%} - {#- loop through grains -#} - {%- for key, value in pillar['grains'].items() recursive -%} - {%- set depth=loop.depth %} -{% for i in range(1,depth) -%}{{ " " }}{%- endfor -%} -{{ key }}: - {%- if value is mapping -%} - {{ loop(value.items()) }} - {%- else %} - {%- if value is not none -%} - {%- for item in value %} -{% for i in range(0,depth) -%}{{ " " }}{%- endfor -%} -- {{ item }} - {%- endfor -%} - {%- endif -%} - {%- endif -%} - {%- endfor -%} -{%- endif -%} diff --git a/states/roles/init.sls b/states/roles/init.sls deleted file mode 100644 index e200622..0000000 --- a/states/roles/init.sls +++ /dev/null @@ -1,13 +0,0 @@ -roles-minion: - service.running: - - name: salt-minion - - watch: - - file: /etc/salt/grains - -/etc/salt/grains: - file.managed: - - source: salt://roles/grains - - user: root - - group: root - - mode: 644 - - template: jinja diff --git a/states/roles/maintain/aurrepo/init.sls b/states/roles/maintain/aurrepo/init.sls index 69281a6..b7654da 100644 --- a/states/roles/maintain/aurrepo/init.sls +++ b/states/roles/maintain/aurrepo/init.sls @@ -4,6 +4,16 @@ base-devel: sudo: pkg.installed +{% if pillar['aur'] is defined -%} +{% if pillar['aur']['require'] is defined -%} +{% for pkg in pillar['aur']['require'] %} +aur_require_{{pkg}}: + pkg.installed: + - name: "{{pkg}}" +{%- endfor -%} +{%- endif -%} +{%- endif %} + user-build: user.present: - name: build @@ -16,6 +26,10 @@ user-build: file.symlink: - target: /mnt/pkgs/aur-local/os/x86_64/ +/build: + file.symlink: + - target: /mnt/build/ + git-aur_repo: git.latest: - name: https://git.actcur.com/actcur/aur_repo diff --git a/states/roles/maintain/aurrepo/pkglist b/states/roles/maintain/aurrepo/pkglist index 95ba7ea..83c9b09 100644 --- a/states/roles/maintain/aurrepo/pkglist +++ b/states/roles/maintain/aurrepo/pkglist @@ -1,5 +1,7 @@ -{% if pillar['aurpkgs'] is defined -%} -{% for pkg in pillar['aurpkgs'] %} +{% if pillar['aur'] is defined -%} +{% if pillar['aur']['pkgs'] is defined -%} +{% for pkg in pillar['aur']['pkgs'] %} {{pkg}} {%- endfor -%} {%- endif -%} +{%- endif -%} diff --git a/states/roles/maintain/gogs/app.ini b/states/roles/maintain/gogs/app.ini new file mode 100644 index 0000000..fa4734a --- /dev/null +++ b/states/roles/maintain/gogs/app.ini @@ -0,0 +1,496 @@ +# !!! NEVER EVER MODIFY THIS FILE !!! +# !!! PLEASE MAKE CHANGES ON CORRESPONDING CUSTOM CONFIG FILE !!! +# !!! IF YOU ARE PACKAGING PROVIDER, PLEASE MAKE OWN COPY OF IT !!! +; App name that shows on every page title +APP_NAME = Gogs +; The name of the system user that runs Gogs +RUN_USER = gogs +; Either "dev", "prod" or "test" +RUN_MODE = prod + +[server] +PROTOCOL = http +DOMAIN = git.actcur.com +ROOT_URL = http://git.actcur.com/ +HTTP_ADDR = 0.0.0.0 +HTTP_PORT = 3000 +; Permission for unix socket +UNIX_SOCKET_PERMISSION = 666 +; Local (DMZ) URL for Gogs workers (such as SSH update) accessing web service. +; In most cases you do not need to change the default value. +; Alter it only if your SSH server node is not the same as HTTP node. +LOCAL_ROOT_URL = %(PROTOCOL)s://%(HTTP_ADDR)s:%(HTTP_PORT)s/ +; Disable SSH feature when not available +DISABLE_SSH = false +; Whether use builtin SSH server or not. +START_SSH_SERVER = true +; Domain name to be exposed in SSH clone URL +SSH_DOMAIN = %(DOMAIN)s +; Port number to be exposed in SSH clone URL +SSH_PORT = 5022 +; Network interface builtin SSH server listens on +SSH_LISTEN_HOST = 0.0.0.0 +; Port number builtin SSH server listens on +SSH_LISTEN_PORT = %(SSH_PORT)s +; Root path of SSH directory, default is '~/.ssh', but you have to use '/home/git/.ssh'. +SSH_ROOT_PATH = +; Choose the ciphers to support for SSH connections +SSH_SERVER_CIPHERS = aes128-ctr, aes192-ctr, aes256-ctr, aes128-gcm@openssh.com, arcfour256, arcfour128 +; Directory to create temporary files when test publick key using ssh-keygen, +; default is system temporary directory. +SSH_KEY_TEST_PATH = +; Path to ssh-keygen, default is 'ssh-keygen' and let shell find out which one to call. +SSH_KEYGEN_PATH = ssh-keygen +; Indicate whether to check minimum key size with corresponding type +MINIMUM_KEY_SIZE_CHECK = false +; Disable CDN even in "prod" mode +OFFLINE_MODE = false +DISABLE_ROUTER_LOG = false +; Generate steps: +; $ ./gogs cert -ca=true -duration=8760h0m0s -host=myhost.example.com +; +; Or from a .pfx file exported from the Windows certificate store (do +; not forget to export the private key): +; $ openssl pkcs12 -in cert.pfx -out cert.pem -nokeys +; $ openssl pkcs12 -in cert.pfx -out key.pem -nocerts -nodes +CERT_FILE = /var/lib/gogs/cert/cert.pem +KEY_FILE = /var/lib/gogs/cert/key.pem +; Allowed TLS version values: SSL30, TLS10, TLS11, TLS12 +TLS_MIN_VERSION = TLS10 +; Upper level of template and static file path +; default is the path where Gogs is executed +STATIC_ROOT_PATH = /usr/share/gogs +; Default path for App data +APP_DATA_PATH = /var/lib/gogs/data +; Application level GZIP support +ENABLE_GZIP = false +; Landing page for non-logged users, can be "home" or "explore" +LANDING_PAGE = home + +[repository] +; Root path for storing repositories's data, default is "~//gogs-repositories" +ROOT = /var/lib/gogs/repos +; The script type server supports, sometimes could be "sh" +SCRIPT_TYPE = bash +; Default ANSI charset for an unrecognized charset +ANSI_CHARSET = +; Force every new repository to be private +FORCE_PRIVATE = false +; Global maximum creation limit of repository per user, -1 means no limit +MAX_CREATION_LIMIT = -1 +; Mirror sync queue length, increase if mirror syncing starts hanging +MIRROR_QUEUE_LENGTH = 1000 +; Patch test queue length, increase if pull request patch testing starts hanging +PULL_REQUEST_QUEUE_LENGTH = 1000 +; Preferred Licenses to place at the top of the list +; Name must match file name in conf/license or custom/conf/license +PREFERRED_LICENSES = Apache License 2.0,MIT License +; Disable ability to interact with repositories by HTTP protocol +DISABLE_HTTP_GIT = false +; Enable ability to migrate repository by local path +ENABLE_LOCAL_PATH_MIGRATION = false +; Concurrency is used to retrieve commits information. This variable define +; the maximum number of tasks that can be run at the same time. Usually, the +; value depend of how many CPUs (cores) you have. If the value is set to zero +; or under, GOGS will automatically detect the number of CPUs your system have +COMMITS_FETCH_CONCURRENCY = 0 +; Enable render mode for raw file +ENABLE_RAW_FILE_RENDER_MODE = false + +[repository.editor] +; List of file extensions that should have line wraps in the CodeMirror editor. +; Separate extensions with a comma. To line wrap files without extension, just put a comma +LINE_WRAP_EXTENSIONS = .txt,.md,.markdown,.mdown,.mkd, +; Valid file modes that have a preview API associated with them, such as api/v1/markdown. +; Separate values by commas. Preview tab in edit mode won't show if the file extension doesn't match +PREVIEWABLE_FILE_MODES = markdown + +[repository.upload] +; Enable repository file uploads. +ENABLED = true +; Path to temporarily store uploads (default path gets cleaned by Gogs in every start) +TEMP_PATH = /var/cache/gogs +; File types that are allowed to be uploaded, e.g. image/jpeg|image/png. Leave empty means allow any file type +ALLOWED_TYPES = +; Maximum size of each file in MB +FILE_MAX_SIZE = 3 +; Maximum number of files per upload +MAX_FILES = 5 + +; Attachment settings for releases +[release.attachment] +; Whether attachments are enabled. Defaults to `true` +ENABLED = true +; Path for attachments. Defaults to `data/attachments` +PATH = data/attachments +; One or more allowed types, e.g. image/jpeg|image/png +ALLOWED_TYPES = */* +; Max size of each file. Defaults to 32MB +MAX_SIZE = 32 +; Max number of files per upload. Defaults to 10 +MAX_FILES = 10 + +[markdown] +; Enable hard line break extension +ENABLE_HARD_LINE_BREAK = false +; List of custom URL-Schemes that are allowed as links when rendering Markdown +; for example git,magnet +CUSTOM_URL_SCHEMES = +; List of file extensions that should be rendered/edited as Markdown +; Separate extensions with a comma. To render files w/o extension as markdown, just put a comma +FILE_EXTENSIONS = .md,.markdown,.mdown,.mkd + +[smartypants] +ENABLED = false +FRACTIONS = true +DASHES = true +LATEX_DASHES = true +ANGLED_QUOTES = true + +[http] +; Value for Access-Control-Allow-Origin header, default is not to present +ACCESS_CONTROL_ALLOW_ORIGIN = + +; Define allowed algorithms and their minimum key length (use -1 to disable a type) +[ssh.minimum_key_sizes] +ED25519 = 256 +ECDSA = 256 +RSA = 2048 +DSA = 1024 + +[database] +; Either "mysql", "postgres" or "sqlite3", you can connect to TiDB with MySQL protocol +DB_TYPE = mysql +;HOST =localhost:3306 +;USER =root +;PASSWD =Eichkatze12 +HOST = sql.actcur.com:3306 +NAME = gogs +USER = gogs +PASSWD = eyxaG5WvIEnanWbsnYUM +; For "postgres" only, either "disable", "require" or "verify-full" +SSL_MODE = disable +; For "sqlite3" and "tidb", use absolute path when you start as service +PATH = /var/lib/gogs/gogs.db + +[admin] +; Disable regular (non-admin) users to create organizations +DISABLE_REGULAR_ORG_CREATION = false + +[security] +INSTALL_LOCK = true +; !!CHANGE THIS TO KEEP YOUR USER DATA SAFE!! +#@FDEWREWR&*( +SECRET_KEY = 1BAesyiWwNseJMM +; Auto-login remember days +LOGIN_REMEMBER_DAYS = 7 +COOKIE_USERNAME = gogs_awesome +COOKIE_REMEMBER_NAME = gogs_incredible +COOKIE_SECURE = false +; Reverse proxy authentication header name of user name +REVERSE_PROXY_AUTHENTICATION_USER = X-WEBAUTH-USER +; Enable to set cookie to indicate user login status +ENABLE_LOGIN_STATUS_COOKIE = false +LOGIN_STATUS_COOKIE_NAME = login_status + +[service] +ACTIVE_CODE_LIVE_MINUTES = 180 +RESET_PASSWD_CODE_LIVE_MINUTES = 180 +; User need to confirm e-mail for registration +REGISTER_EMAIL_CONFIRM = false +; Does not allow register and admin create account only +DISABLE_REGISTRATION = false +; User must sign in to view anything. +REQUIRE_SIGNIN_VIEW = false +; Mail notification +ENABLE_NOTIFY_MAIL = true +; More detail: https://github.com/gogits/gogs/issues/165 +ENABLE_REVERSE_PROXY_AUTHENTICATION = false +ENABLE_REVERSE_PROXY_AUTO_REGISTRATION = false +; Enable captcha validation for registration +ENABLE_CAPTCHA = true + +[webhook] +; Types are enabled for users to use, can be "gogs", "slack", "discord" +TYPES = gogs, slack, discord +; Hook task queue length, increase if webhook shooting starts hanging +QUEUE_LENGTH = 1000 +; Deliver timeout in seconds +DELIVER_TIMEOUT = 15 +; Allow insecure certification +SKIP_TLS_VERIFY = false +; Number of history information in each page +PAGING_NUM = 10 + +[mailer] +ENABLED = true +; Buffer length of channel, keep it as it is if you don't know what it is. +SEND_BUFFER_LEN = 100 +; Name displayed in mail title +SUBJECT = %(APP_NAME)s +; Mail server +; Gmail: smtp.gmail.com:587 +; QQ: smtp.qq.com:465 +; Note, if the port ends with "465", SMTPS will be used. Using STARTTLS on port 587 is recommended per RFC 6409. If the server supports STARTTLS it will always be used. +HOST = smtp.zoho.com:587 +; Disable HELO operation when hostname are different. +DISABLE_HELO = true +; Custom hostname for HELO operation, default is from system. +HELO_HOSTNAME = +; Do not verify the certificate of the server. Only use this for self-signed certificates +SKIP_VERIFY = false +; Use client certificate +USE_CERTIFICATE = false +CERT_FILE = custom/mailer/cert.pem +KEY_FILE = custom/mailer/key.pem +; Mail from address, RFC 5322. This can be just an email address, or the `"Name" ` format +FROM = gogs@actcur.com +; Mailer user name and password +USER = gogs@actcur.com +PASSWD = kKbG2t7IZmWaVbNQYRcd +; Use text/plain as format of content +USE_PLAIN_TEXT = false + +[cache] +; Either "memory", "redis", or "memcache", default is "memory" +ADAPTER = memory +; For "memory" only, GC interval in seconds, default is 60 +INTERVAL = 60 +; For "redis" and "memcache", connection host address +; redis: network=tcp,addr=:6379,password=macaron,db=0,pool_size=100,idle_timeout=180 +; memcache: `127.0.0.1:11211` +HOST = + +[session] +; Either "memory", "file", or "redis", default is "memory" +PROVIDER = file +; Provider config options +; memory: not have any config yet +; file: session file path, e.g. `data/sessions` +; redis: network=tcp,addr=:6379,password=macaron,db=0,pool_size=100,idle_timeout=180 +; mysql: go-sql-driver/mysql dsn config string, e.g. `root:password@/session_table` +PROVIDER_CONFIG = data/sessions +; Session cookie name +COOKIE_NAME = i_like_gogits +; If you use session in https only, default is false +COOKIE_SECURE = false +; Enable set cookie, default is true +ENABLE_SET_COOKIE = true +; Session GC time interval, default is 3600 +GC_INTERVAL_TIME = 3600 +; Session life time, default is 86400 +SESSION_LIFE_TIME = 86400 +; Cookie name for CSRF +CSRF_COOKIE_NAME = _csrf + +[picture] +; Path to store user uploaded avatars +AVATAR_UPLOAD_PATH = data/avatars +; Chinese users can choose "duoshuo" +; or a custom avatar source, like: http://cn.gravatar.com/avatar/ +GRAVATAR_SOURCE = gravatar +; This value will be forced to be true in offline mode. +DISABLE_GRAVATAR = false +; Federated avatar lookup uses DNS to discover avatar associated +; with emails, see https://www.libravatar.org +; This value will be forced to be false in offline mode or Gravatar is disbaled. +ENABLE_FEDERATED_AVATAR = true + +; Attachment settings for issues +[attachment] +; Whether attachments are enabled. Defaults to `true` +ENABLED = true +; Path for attachments. Defaults to `data/attachments` +PATH = data/attachments +; One or more allowed types, e.g. image/jpeg|image/png +ALLOWED_TYPES = image/jpeg|image/png +; Max size of each file. Defaults to 4MB +MAX_SIZE = 4 +; Max number of files per upload. Defaults to 5 +MAX_FILES = 5 + +[time] +; Specifies the format for fully outputed dates. Defaults to RFC1123 +; Special supported values are ANSIC, UnixDate, RubyDate, RFC822, RFC822Z, RFC850, RFC1123, RFC1123Z, RFC3339, RFC3339Nano, Kitchen, Stamp, StampMilli, StampMicro and StampNano +; For more information about the format see http://golang.org/pkg/time/#pkg-constants +FORMAT = + +; General settings of loggers +[log] +ROOT_PATH = /var/log/gogs +; Can be "console" and "file", default is "console" +; Use comma to separate multiple modes, e.g. "console, file" +MODE = file +; Buffer length of channel, keep it as it is if you don't know what it is. +BUFFER_LEN = 100 +; Either "Trace", "Info", "Warn", "Error", "Fatal", default is "Trace" +LEVEL = Info + +; For "console" mode only +[log.console] +; leave empty to inherit +LEVEL = + +; For "file" mode only +[log.file] +; leave empty to inherit +LEVEL = +; This enables automated log rotate (switch of following options) +LOG_ROTATE = true +; Segment log daily +DAILY_ROTATE = true +; Max size shift of single file, default is 28 means 1 << 28, 256MB +MAX_SIZE_SHIFT = 28 +; Max line number of single file +MAX_LINES = 1000000 +; Expired days of log file (delete after max days) +MAX_DAYS = 7 + +; For "slack" mode only +[log.slack] +; leave empty to inherit +LEVEL = +; Webhook URL +URL = + +[log.xorm] +; Enable file rotation +ROTATE = true +; Rotate every day +ROTATE_DAILY = true +; Rotate once file size excesses x MB +MAX_SIZE = 100 +; Maximum days to keep logger files +MAX_DAYS = 3 + +[cron] +; Enable running cron tasks periodically. +ENABLED = true +; Run cron tasks when Gogs starts. +RUN_AT_START = false + +; Update mirrors +[cron.update_mirrors] +SCHEDULE = @every 10m + +; Repository health check +[cron.repo_health_check] +SCHEDULE = @every 24h +TIMEOUT = 60s +; Arguments for command 'git fsck', e.g. "--unreachable --tags" +; see more on http://git-scm.com/docs/git-fsck/1.7.5 +ARGS = + +; Check repository statistics +[cron.check_repo_stats] +RUN_AT_START = true +SCHEDULE = @every 24h + +; Cleanup repository archives +[cron.repo_archive_cleanup] +RUN_AT_START = false +SCHEDULE = @every 24h +; Time duration to check if archive should be cleaned +OLDER_THAN = 24h + +[git] +; Disables highlight of added and removed changes +DISABLE_DIFF_HIGHLIGHT = false +; Max number of lines allowed of a single file in diff view +MAX_GIT_DIFF_LINES = 1000 +; Max number of characters of a line allowed in diff view +MAX_GIT_DIFF_LINE_CHARACTERS = 500 +; Max number of files shown in diff view +MAX_GIT_DIFF_FILES = 100 +; Arguments for command 'git gc', e.g. "--aggressive --auto" +; see more on http://git-scm.com/docs/git-gc/1.7.5 +GC_ARGS = + +; Operation timeout in seconds +[git.timeout] +MIGRATE = 600 +MIRROR = 300 +CLONE = 300 +PULL = 300 +GC = 60 + +[mirror] +; Default interval in hours between each check +DEFAULT_INTERVAL = 8 + +[api] +; Max number of items will response in a page +MAX_RESPONSE_ITEMS = 50 + +[ui] +; Number of repositories that are showed in one explore page +EXPLORE_PAGING_NUM = 20 +; Number of issues that are showed in one page +ISSUE_PAGING_NUM = 10 +; Number of maximum commits showed in one activity feed +FEED_MAX_COMMIT_NUM = 5 +; Value of "theme-color" meta tag, used by Android >= 5.0 +; An invalid color like "none" or "disable" will have the default style +; More info: https://developers.google.com/web/updates/2014/11/Support-for-theme-color-in-Chrome-39-for-Android +THEME_COLOR_META_TAG = `#ff5343` +; Max size in bytes of files to be displayed (default is 8MB) +MAX_DISPLAY_FILE_SIZE = 8388608 + +[ui.admin] +; Number of users that are showed in one page +USER_PAGING_NUM = 50 +; Number of repos that are showed in one page +REPO_PAGING_NUM = 50 +; Number of notices that are showed in one page +NOTICE_PAGING_NUM = 25 +; Number of organization that are showed in one page +ORG_PAGING_NUM = 50 + +[ui.user] +; Number of repos that are showed in one page +REPO_PAGING_NUM = 15 +; Number of news feeds that are showed in one page +NEWS_FEED_PAGING_NUM = 20 +; Number of commits that are showed in one page +COMMITS_PAGING_NUM = 30 + +[i18n] +LANGS = en-US,zh-CN,zh-HK,zh-TW,de-DE,fr-FR,nl-NL,lv-LV,ru-RU,ja-JP,es-ES,pt-BR,pl-PL,bg-BG,it-IT,fi-FI,tr-TR,cs-CZ,sr-SP,sv-SE,ko-KR,gl-ES,uk-UA,en-GB,hu-HU +NAMES = English,简体中文,繁體中文（香港）,繁體中文（台湾）,Deutsch,français,Nederlands,latviešu,русский,日本語,español,português do Brasil,polski,български,italiano,suomi,Türkçe,čeština,српски,svenska,한국어,galego,українська,English (United Kingdom),Magyar + +; Used for datetimepicker +[i18n.datelang] +en-US = en +zh-CN = zh +zh-HK = zh-TW +zh-TW = zh-TW +de-DE = de +fr-FR = fr +nl-NL = nl +lv-LV = lv +ru-RU = ru +ja-JP = ja +es-ES = es +pt-BR = pt-BR +pl-PL = pl +bg-BG = bg +it-IT = it +fi-FI = fi +tr-TR = tr +cs-CZ = cs-CZ +sr-SP = sr +sv-SE = sv +ko-KR = ko +gl-ES = gl +uk-UA = uk + +; Extension mapping to highlight class +; e.g. .toml=ini +[highlight.mapping] + +[other] +SHOW_FOOTER_BRANDING = false +; Show version information about Gogs and Go in the footer +SHOW_FOOTER_VERSION = true +; Show time of template execution in the footer +SHOW_FOOTER_TEMPLATE_LOAD_TIME = true diff --git a/states/roles/maintain/gogs/init.sls b/states/roles/maintain/gogs/init.sls new file mode 100644 index 0000000..738831f --- /dev/null +++ b/states/roles/maintain/gogs/init.sls @@ -0,0 +1,11 @@ + +gogs_package: + pkg.installed: + - name: gogs + +/etc/gogs/api.ini: + file.managed: + - source: salt://roles/maintain/gogs/api.ini + - user: root + - group: root + - mode: 644 diff --git a/states/roles/maintain/pass/init.sls b/states/roles/maintain/pass/init.sls new file mode 100644 index 0000000..963eb0b --- /dev/null +++ b/states/roles/maintain/pass/init.sls @@ -0,0 +1,63 @@ +#install teampass - needs to be changed to being built in the aurrepo as soon as Marcin updates the dependencies to not include mysql +teampass_/etc/pacman.conf: + file.append: + - name: /etc/pacman.conf + - source: salt://roles/maintain/pass/temp-repo.conf + +install_teampass: + pkg.installed: + - name: teampass + +teampass_php-gd: + pkg.installed: + - name: php-gd + +teampass_php-fpm: + pkg.installed: + - name: php-fpm + service.running: + - name: php-fpm + - enable: true + - watch: + - file: /etc/php/php.ini + +/etc/php/php.ini: + file.managed: + - source: salt://roles/maintain/pass/php.ini + +/etc/nginx/conf.d/teampass.conf: + file.managed: + - source: salt://roles/maintain/pass/nginx.conf + +#change ownership on directories +"/usr/share/webapps/teampass/includes/config/": + file.directory: + - user: http + - group: http +"/usr/share/webapps/teampass/includes/avatars/": + file.directory: + - user: http + - group: http +"/usr/share/webapps/teampass/includes/libraries/csrfp/libs/": + file.directory: + - user: http + - group: http +"/usr/share/webapps/teampass/includes/libraries/csrfp/js/": + file.directory: + - user: http + - group: http +"/usr/share/webapps/teampass/includes/libraries/csrfp/log/": + file.directory: + - user: http + - group: http + +"/teampass": + file.directory: + - user: http + - group: http + - dir_mode: 700 + - file_mode: 600 + - recurse: + - user + - group + - mode diff --git a/states/roles/maintain/pass/nginx.conf b/states/roles/maintain/pass/nginx.conf new file mode 100644 index 0000000..676cbf7 --- /dev/null +++ b/states/roles/maintain/pass/nginx.conf @@ -0,0 +1,21 @@ +server { + server_name domain.tld www.domain.tld; + root /usr/share/webapps/teampass; + listen 8080; + + location / { + # try to serve file directly, fallback to front controller + try_files $uri /index.php$is_args$args; + } + + location ~ \.php$ { + try_files $uri $document_root$fastcgi_script_name =404; + fastcgi_pass unix:/run/php-fpm/php-fpm.sock; + fastcgi_index index.php; + fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; + include fastcgi.conf; + } + + error_log /var/log/nginx/teampass_error.log; + access_log /var/log/nginx/teampass_access.log; +} diff --git a/states/roles/maintain/pass/php.ini b/states/roles/maintain/pass/php.ini new file mode 100644 index 0000000..70768ed --- /dev/null +++ b/states/roles/maintain/pass/php.ini @@ -0,0 +1,1930 @@ +[PHP] + +;;;;;;;;;;;;;;;;;;; +; About php.ini ; +;;;;;;;;;;;;;;;;;;; +; PHP's initialization file, generally called php.ini, is responsible for +; configuring many of the aspects of PHP's behavior. + +; PHP attempts to find and load this configuration from a number of locations. +; The following is a summary of its search order: +; 1. SAPI module specific location. +; 2. The PHPRC environment variable. (As of PHP 5.2.0) +; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0) +; 4. Current working directory (except CLI) +; 5. The web server's directory (for SAPI modules), or directory of PHP +; (otherwise in Windows) +; 6. The directory from the --with-config-file-path compile time option, or the +; Windows directory (C:\windows or C:\winnt) +; See the PHP docs for more specific information. +; http://php.net/configuration.file + +; The syntax of the file is extremely simple. Whitespace and lines +; beginning with a semicolon are silently ignored (as you probably guessed). +; Section headers (e.g. [Foo]) are also silently ignored, even though +; they might mean something in the future. + +; Directives following the section heading [PATH=/www/mysite] only +; apply to PHP files in the /www/mysite directory. Directives +; following the section heading [HOST=www.example.com] only apply to +; PHP files served from www.example.com. Directives set in these +; special sections cannot be overridden by user-defined INI files or +; at runtime. Currently, [PATH=] and [HOST=] sections only work under +; CGI/FastCGI. +; http://php.net/ini.sections + +; Directives are specified using the following syntax: +; directive = value +; Directive names are *case sensitive* - foo=bar is different from FOO=bar. +; Directives are variables used to configure PHP or PHP extensions. +; There is no name validation. If PHP can't find an expected +; directive because it is not set or is mistyped, a default value will be used. + +; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one +; of the INI constants (On, Off, True, False, Yes, No and None) or an expression +; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a +; previously set variable or directive (e.g. ${foo}) + +; Expressions in the INI file are limited to bitwise operators and parentheses: +; | bitwise OR +; ^ bitwise XOR +; & bitwise AND +; ~ bitwise NOT +; ! boolean NOT + +; Boolean flags can be turned on using the values 1, On, True or Yes. +; They can be turned off using the values 0, Off, False or No. + +; An empty string can be denoted by simply not writing anything after the equal +; sign, or by using the None keyword: + +; foo = ; sets foo to an empty string +; foo = None ; sets foo to an empty string +; foo = "None" ; sets foo to the string 'None' + +; If you use constants in your value, and these constants belong to a +; dynamically loaded extension (either a PHP extension or a Zend extension), +; you may only use these constants *after* the line that loads the extension. + +;;;;;;;;;;;;;;;;;;; +; About this file ; +;;;;;;;;;;;;;;;;;;; +; PHP comes packaged with two INI files. One that is recommended to be used +; in production environments and one that is recommended to be used in +; development environments. + +; php.ini-production contains settings which hold security, performance and +; best practices at its core. But please be aware, these settings may break +; compatibility with older or less security conscience applications. We +; recommending using the production ini in production and testing environments. + +; php.ini-development is very similar to its production variant, except it is +; much more verbose when it comes to errors. We recommend using the +; development version only in development environments, as errors shown to +; application users can inadvertently leak otherwise secure information. + +; This is php.ini-production INI file. + +;;;;;;;;;;;;;;;;;;; +; Quick Reference ; +;;;;;;;;;;;;;;;;;;; +; The following are all the settings which are different in either the production +; or development versions of the INIs with respect to PHP's default behavior. +; Please see the actual settings later in the document for more details as to why +; we recommend these changes in PHP's behavior. + +; display_errors +; Default Value: On +; Development Value: On +; Production Value: Off + +; display_startup_errors +; Default Value: Off +; Development Value: On +; Production Value: Off + +; error_reporting +; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED +; Development Value: E_ALL +; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT + +; html_errors +; Default Value: On +; Development Value: On +; Production value: On + +; log_errors +; Default Value: Off +; Development Value: On +; Production Value: On + +; max_input_time +; Default Value: -1 (Unlimited) +; Development Value: 60 (60 seconds) +; Production Value: 60 (60 seconds) + +; output_buffering +; Default Value: Off +; Development Value: 4096 +; Production Value: 4096 + +; register_argc_argv +; Default Value: On +; Development Value: Off +; Production Value: Off + +; request_order +; Default Value: None +; Development Value: "GP" +; Production Value: "GP" + +; session.gc_divisor +; Default Value: 100 +; Development Value: 1000 +; Production Value: 1000 + +; session.sid_bits_per_character +; Default Value: 4 +; Development Value: 5 +; Production Value: 5 + +; short_open_tag +; Default Value: On +; Development Value: Off +; Production Value: Off + +; track_errors +; Default Value: Off +; Development Value: On +; Production Value: Off + +; variables_order +; Default Value: "EGPCS" +; Development Value: "GPCS" +; Production Value: "GPCS" + +;;;;;;;;;;;;;;;;;;;; +; php.ini Options ; +;;;;;;;;;;;;;;;;;;;; +; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini" +;user_ini.filename = ".user.ini" + +; To disable this feature set this option to empty value +;user_ini.filename = + +; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes) +;user_ini.cache_ttl = 300 + +;;;;;;;;;;;;;;;;;;;; +; Language Options ; +;;;;;;;;;;;;;;;;;;;; + +; Enable the PHP scripting language engine under Apache. +; http://php.net/engine +engine = On + +; This directive determines whether or not PHP will recognize code between +; tags as PHP source which should be processed as such. It is +; generally recommended that should be used and that this feature +; should be disabled, as enabling it may result in issues when generating XML +; documents, however this remains supported for backward compatibility reasons. +; Note that this directive does not control the would work. +; http://php.net/syntax-highlighting +;highlight.string = #DD0000 +;highlight.comment = #FF9900 +;highlight.keyword = #007700 +;highlight.default = #0000BB +;highlight.html = #000000 + +; If enabled, the request will be allowed to complete even if the user aborts +; the request. Consider enabling it if executing long requests, which may end up +; being interrupted by the user or a browser timing out. PHP's default behavior +; is to disable this feature. +; http://php.net/ignore-user-abort +;ignore_user_abort = On + +; Determines the size of the realpath cache to be used by PHP. This value should +; be increased on systems where PHP opens many files to reflect the quantity of +; the file operations performed. +; http://php.net/realpath-cache-size +;realpath_cache_size = 4096k + +; Duration of time, in seconds for which to cache realpath information for a given +; file or directory. For systems with rarely changing files, consider increasing this +; value. +; http://php.net/realpath-cache-ttl +;realpath_cache_ttl = 120 + +; Enables or disables the circular reference collector. +; http://php.net/zend.enable-gc +zend.enable_gc = On + +; If enabled, scripts may be written in encodings that are incompatible with +; the scanner. CP936, Big5, CP949 and Shift_JIS are the examples of such +; encodings. To use this feature, mbstring extension must be enabled. +; Default: Off +;zend.multibyte = Off + +; Allows to set the default encoding for the scripts. This value will be used +; unless "declare(encoding=...)" directive appears at the top of the script. +; Only affects if zend.multibyte is set. +; Default: "" +;zend.script_encoding = + +;;;;;;;;;;;;;;;;; +; Miscellaneous ; +;;;;;;;;;;;;;;;;; + +; Decides whether PHP may expose the fact that it is installed on the server +; (e.g. by adding its signature to the Web server header). It is no security +; threat in any way, but it makes it possible to determine whether you use PHP +; on your server or not. +; http://php.net/expose-php +expose_php = On + +;;;;;;;;;;;;;;;;;;; +; Resource Limits ; +;;;;;;;;;;;;;;;;;;; + +; Maximum execution time of each script, in seconds +; http://php.net/max-execution-time +; Note: This directive is hardcoded to 0 for the CLI SAPI +max_execution_time = 60 + +; Maximum amount of time each script may spend parsing request data. It's a good +; idea to limit this time on productions servers in order to eliminate unexpectedly +; long running scripts. +; Note: This directive is hardcoded to -1 for the CLI SAPI +; Default Value: -1 (Unlimited) +; Development Value: 60 (60 seconds) +; Production Value: 60 (60 seconds) +; http://php.net/max-input-time +max_input_time = 60 + +; Maximum input variable nesting level +; http://php.net/max-input-nesting-level +;max_input_nesting_level = 64 + +; How many GET/POST/COOKIE input variables may be accepted +; max_input_vars = 1000 + +; Maximum amount of memory a script may consume (128MB) +; http://php.net/memory-limit +memory_limit = 128M + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +; Error handling and logging ; +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; + +; This directive informs PHP of which errors, warnings and notices you would like +; it to take action for. The recommended way of setting values for this +; directive is through the use of the error level constants and bitwise +; operators. The error level constants are below here for convenience as well as +; some common settings and their meanings. +; By default, PHP is set to take action on all errors, notices and warnings EXCEPT +; those related to E_NOTICE and E_STRICT, which together cover best practices and +; recommended coding standards in PHP. For performance reasons, this is the +; recommend error reporting setting. Your production server shouldn't be wasting +; resources complaining about best practices and coding standards. That's what +; development servers and development settings are for. +; Note: The php.ini-development file has this setting as E_ALL. This +; means it pretty much reports everything which is exactly what you want during +; development and early testing. +; +; Error Level Constants: +; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0) +; E_ERROR - fatal run-time errors +; E_RECOVERABLE_ERROR - almost fatal run-time errors +; E_WARNING - run-time warnings (non-fatal errors) +; E_PARSE - compile-time parse errors +; E_NOTICE - run-time notices (these are warnings which often result +; from a bug in your code, but it's possible that it was +; intentional (e.g., using an uninitialized variable and +; relying on the fact it is automatically initialized to an +; empty string) +; E_STRICT - run-time notices, enable to have PHP suggest changes +; to your code which will ensure the best interoperability +; and forward compatibility of your code +; E_CORE_ERROR - fatal errors that occur during PHP's initial startup +; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's +; initial startup +; E_COMPILE_ERROR - fatal compile-time errors +; E_COMPILE_WARNING - compile-time warnings (non-fatal errors) +; E_USER_ERROR - user-generated error message +; E_USER_WARNING - user-generated warning message +; E_USER_NOTICE - user-generated notice message +; E_DEPRECATED - warn about code that will not work in future versions +; of PHP +; E_USER_DEPRECATED - user-generated deprecation warnings +; +; Common Values: +; E_ALL (Show all errors, warnings and notices including coding standards.) +; E_ALL & ~E_NOTICE (Show all errors, except for notices) +; E_ALL & ~E_NOTICE & ~E_STRICT (Show all errors, except for notices and coding standards warnings.) +; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors) +; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED +; Development Value: E_ALL +; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT +; http://php.net/error-reporting +error_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT + +; This directive controls whether or not and where PHP will output errors, +; notices and warnings too. Error output is very useful during development, but +; it could be very dangerous in production environments. Depending on the code +; which is triggering the error, sensitive information could potentially leak +; out of your application such as database usernames and passwords or worse. +; For production environments, we recommend logging errors rather than +; sending them to STDOUT. +; Possible Values: +; Off = Do not display any errors +; stderr = Display errors to STDERR (affects only CGI/CLI binaries!) +; On or stdout = Display errors to STDOUT +; Default Value: On +; Development Value: On +; Production Value: Off +; http://php.net/display-errors +display_errors = Off + +; The display of errors which occur during PHP's startup sequence are handled +; separately from display_errors. PHP's default behavior is to suppress those +; errors from clients. Turning the display of startup errors on can be useful in +; debugging configuration problems. We strongly recommend you +; set this to 'off' for production servers. +; Default Value: Off +; Development Value: On +; Production Value: Off +; http://php.net/display-startup-errors +display_startup_errors = Off + +; Besides displaying errors, PHP can also log errors to locations such as a +; server-specific log, STDERR, or a location specified by the error_log +; directive found below. While errors should not be displayed on productions +; servers they should still be monitored and logging is a great way to do that. +; Default Value: Off +; Development Value: On +; Production Value: On +; http://php.net/log-errors +log_errors = On + +; Set maximum length of log_errors. In error_log information about the source is +; added. The default is 1024 and 0 allows to not apply any maximum length at all. +; http://php.net/log-errors-max-len +log_errors_max_len = 1024 + +; Do not log repeated messages. Repeated errors must occur in same file on same +; line unless ignore_repeated_source is set true. +; http://php.net/ignore-repeated-errors +ignore_repeated_errors = Off + +; Ignore source of message when ignoring repeated messages. When this setting +; is On you will not log errors with repeated messages from different files or +; source lines. +; http://php.net/ignore-repeated-source +ignore_repeated_source = Off + +; If this parameter is set to Off, then memory leaks will not be shown (on +; stdout or in the log). This has only effect in a debug compile, and if +; error reporting includes E_WARNING in the allowed list +; http://php.net/report-memleaks +report_memleaks = On + +; This setting is on by default. +;report_zend_debug = 0 + +; Store the last error/warning message in $php_errormsg (boolean). Setting this value +; to On can assist in debugging and is appropriate for development servers. It should +; however be disabled on production servers. +; Default Value: Off +; Development Value: On +; Production Value: Off +; http://php.net/track-errors +track_errors = Off + +; Turn off normal error reporting and emit XML-RPC error XML +; http://php.net/xmlrpc-errors +;xmlrpc_errors = 0 + +; An XML-RPC faultCode +;xmlrpc_error_number = 0 + +; When PHP displays or logs an error, it has the capability of formatting the +; error message as HTML for easier reading. This directive controls whether +; the error message is formatted as HTML or not. +; Note: This directive is hardcoded to Off for the CLI SAPI +; Default Value: On +; Development Value: On +; Production value: On +; http://php.net/html-errors +html_errors = On + +; If html_errors is set to On *and* docref_root is not empty, then PHP +; produces clickable error messages that direct to a page describing the error +; or function causing the error in detail. +; You can download a copy of the PHP manual from http://php.net/docs +; and change docref_root to the base URL of your local copy including the +; leading '/'. You must also specify the file extension being used including +; the dot. PHP's default behavior is to leave these settings empty, in which +; case no links to documentation are generated. +; Note: Never use this feature for production boxes. +; http://php.net/docref-root +; Examples +;docref_root = "/phpmanual/" + +; http://php.net/docref-ext +;docref_ext = .html + +; String to output before an error message. PHP's default behavior is to leave +; this setting blank. +; http://php.net/error-prepend-string +; Example: +;error_prepend_string = "" + +; String to output after an error message. PHP's default behavior is to leave +; this setting blank. +; http://php.net/error-append-string +; Example: +;error_append_string = "" + +; Log errors to specified file. PHP's default behavior is to leave this value +; empty. +; http://php.net/error-log +; Example: +;error_log = php_errors.log +; Log errors to syslog (Event Log on Windows). +;error_log = syslog + +;windows.show_crt_warning +; Default value: 0 +; Development value: 0 +; Production value: 0 + +;;;;;;;;;;;;;;;;; +; Data Handling ; +;;;;;;;;;;;;;;;;; + +; The separator used in PHP generated URLs to separate arguments. +; PHP's default setting is "&". +; http://php.net/arg-separator.output +; Example: +;arg_separator.output = "&" + +; List of separator(s) used by PHP to parse input URLs into variables. +; PHP's default setting is "&". +; NOTE: Every character in this directive is considered as separator! +; http://php.net/arg-separator.input +; Example: +;arg_separator.input = ";&" + +; This directive determines which super global arrays are registered when PHP +; starts up. G,P,C,E & S are abbreviations for the following respective super +; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty +; paid for the registration of these arrays and because ENV is not as commonly +; used as the others, ENV is not recommended on productions servers. You +; can still get access to the environment variables through getenv() should you +; need to. +; Default Value: "EGPCS" +; Development Value: "GPCS" +; Production Value: "GPCS"; +; http://php.net/variables-order +variables_order = "GPCS" + +; This directive determines which super global data (G,P & C) should be +; registered into the super global array REQUEST. If so, it also determines +; the order in which that data is registered. The values for this directive +; are specified in the same manner as the variables_order directive, +; EXCEPT one. Leaving this value empty will cause PHP to use the value set +; in the variables_order directive. It does not mean it will leave the super +; globals array REQUEST empty. +; Default Value: None +; Development Value: "GP" +; Production Value: "GP" +; http://php.net/request-order +request_order = "GP" + +; This directive determines whether PHP registers $argv & $argc each time it +; runs. $argv contains an array of all the arguments passed to PHP when a script +; is invoked. $argc contains an integer representing the number of arguments +; that were passed when the script was invoked. These arrays are extremely +; useful when running scripts from the command line. When this directive is +; enabled, registering these variables consumes CPU cycles and memory each time +; a script is executed. For performance reasons, this feature should be disabled +; on production servers. +; Note: This directive is hardcoded to On for the CLI SAPI +; Default Value: On +; Development Value: Off +; Production Value: Off +; http://php.net/register-argc-argv +register_argc_argv = Off + +; When enabled, the ENV, REQUEST and SERVER variables are created when they're +; first used (Just In Time) instead of when the script starts. If these +; variables are not used within a script, having this directive on will result +; in a performance gain. The PHP directive register_argc_argv must be disabled +; for this directive to have any affect. +; http://php.net/auto-globals-jit +auto_globals_jit = On + +; Whether PHP will read the POST data. +; This option is enabled by default. +; Most likely, you won't want to disable this option globally. It causes $_POST +; and $_FILES to always be empty; the only way you will be able to read the +; POST data will be through the php://input stream wrapper. This can be useful +; to proxy requests or to process the POST data in a memory efficient fashion. +; http://php.net/enable-post-data-reading +;enable_post_data_reading = Off + +; Maximum size of POST data that PHP will accept. +; Its value may be 0 to disable the limit. It is ignored if POST data reading +; is disabled through enable_post_data_reading. +; http://php.net/post-max-size +post_max_size = 8M + +; Automatically add files before PHP document. +; http://php.net/auto-prepend-file +auto_prepend_file = + +; Automatically add files after PHP document. +; http://php.net/auto-append-file +auto_append_file = + +; By default, PHP will output a media type using the Content-Type header. To +; disable this, simply set it to be empty. +; +; PHP's built-in default media type is set to text/html. +; http://php.net/default-mimetype +default_mimetype = "text/html" + +; PHP's default character set is set to UTF-8. +; http://php.net/default-charset +default_charset = "UTF-8" + +; PHP internal character encoding is set to empty. +; If empty, default_charset is used. +; http://php.net/internal-encoding +;internal_encoding = + +; PHP input character encoding is set to empty. +; If empty, default_charset is used. +; http://php.net/input-encoding +;input_encoding = + +; PHP output character encoding is set to empty. +; If empty, default_charset is used. +; See also output_buffer. +; http://php.net/output-encoding +;output_encoding = + +;;;;;;;;;;;;;;;;;;;;;;;;; +; Paths and Directories ; +;;;;;;;;;;;;;;;;;;;;;;;;; + +; UNIX: "/path1:/path2" +;include_path = ".:/php/includes" +; +; Windows: "\path1;\path2" +;include_path = ".;c:\php\includes" +; +; PHP's default setting for include_path is ".;/path/to/php/pear" +; http://php.net/include-path + +; The root of the PHP pages, used only if nonempty. +; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root +; if you are running php as a CGI under any web server (other than IIS) +; see documentation for security issues. The alternate is to use the +; cgi.force_redirect configuration below +; http://php.net/doc-root +doc_root = + +; The directory under which PHP opens the script using /~username used only +; if nonempty. +; http://php.net/user-dir +user_dir = + +; Directory in which the loadable extensions (modules) reside. +; http://php.net/extension-dir +extension_dir = "/usr/lib/php/modules/" +; On windows: +; extension_dir = "ext" + +; Directory where the temporary files should be placed. +; Defaults to the system default (see sys_get_temp_dir) +; sys_temp_dir = "/tmp" + +; Whether or not to enable the dl() function. The dl() function does NOT work +; properly in multithreaded servers, such as IIS or Zeus, and is automatically +; disabled on them. +; http://php.net/enable-dl +enable_dl = Off + +; cgi.force_redirect is necessary to provide security running PHP as a CGI under +; most web servers. Left undefined, PHP turns this on by default. You can +; turn it off here AT YOUR OWN RISK +; **You CAN safely turn this off for IIS, in fact, you MUST.** +; http://php.net/cgi.force-redirect +;cgi.force_redirect = 1 + +; if cgi.nph is enabled it will force cgi to always sent Status: 200 with +; every request. PHP's default behavior is to disable this feature. +;cgi.nph = 1 + +; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape +; (iPlanet) web servers, you MAY need to set an environment variable name that PHP +; will look for to know it is OK to continue execution. Setting this variable MAY +; cause security issues, KNOW WHAT YOU ARE DOING FIRST. +; http://php.net/cgi.redirect-status-env +;cgi.redirect_status_env = + +; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's +; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok +; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting +; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting +; of zero causes PHP to behave as before. Default is 1. You should fix your scripts +; to use SCRIPT_FILENAME rather than PATH_TRANSLATED. +; http://php.net/cgi.fix-pathinfo +;cgi.fix_pathinfo=1 + +; if cgi.discard_path is enabled, the PHP CGI binary can safely be placed outside +; of the web tree and people will not be able to circumvent .htaccess security. +; http://php.net/cgi.dicard-path +;cgi.discard_path=1 + +; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate +; security tokens of the calling client. This allows IIS to define the +; security context that the request runs under. mod_fastcgi under Apache +; does not currently support this feature (03/17/2002) +; Set to 1 if running under IIS. Default is zero. +; http://php.net/fastcgi.impersonate +;fastcgi.impersonate = 1 + +; Disable logging through FastCGI connection. PHP's default behavior is to enable +; this feature. +;fastcgi.logging = 0 + +; cgi.rfc2616_headers configuration option tells PHP what type of headers to +; use when sending HTTP response code. If set to 0, PHP sends Status: header that +; is supported by Apache. When this option is set to 1, PHP will send +; RFC2616 compliant header. +; Default is zero. +; http://php.net/cgi.rfc2616-headers +;cgi.rfc2616_headers = 0 + +; cgi.check_shebang_line controls whether CGI PHP checks for line starting with #! +; (shebang) at the top of the running script. This line might be needed if the +; script support running both as stand-alone script and via PHP CGI<. PHP in CGI +; mode skips this line and ignores its content if this directive is turned on. +; http://php.net/cgi.check-shebang-line +;cgi.check_shebang_line=1 + +;;;;;;;;;;;;;;;; +; File Uploads ; +;;;;;;;;;;;;;;;; + +; Whether to allow HTTP file uploads. +; http://php.net/file-uploads +file_uploads = On + +; Temporary directory for HTTP uploaded files (will use system default if not +; specified). +; http://php.net/upload-tmp-dir +;upload_tmp_dir = + +; Maximum allowed size for uploaded files. +; http://php.net/upload-max-filesize +upload_max_filesize = 2M + +; Maximum number of files that can be uploaded via a single request +max_file_uploads = 20 + +;;;;;;;;;;;;;;;;;; +; Fopen wrappers ; +;;;;;;;;;;;;;;;;;; + +; Whether to allow the treatment of URLs (like http:// or ftp://) as files. +; http://php.net/allow-url-fopen +allow_url_fopen = On + +; Whether to allow include/require to open URLs (like http:// or ftp://) as files. +; http://php.net/allow-url-include +allow_url_include = Off + +; Define the anonymous ftp password (your email address). PHP's default setting +; for this is empty. +; http://php.net/from +;from="john@doe.com" + +; Define the User-Agent string. PHP's default setting for this is empty. +; http://php.net/user-agent +;user_agent="PHP" + +; Default timeout for socket based streams (seconds) +; http://php.net/default-socket-timeout +default_socket_timeout = 60 + +; If your scripts have to deal with files from Macintosh systems, +; or you are running on a Mac and need to deal with files from +; unix or win32 systems, setting this flag will cause PHP to +; automatically detect the EOL character in those files so that +; fgets() and file() will work regardless of the source of the file. +; http://php.net/auto-detect-line-endings +;auto_detect_line_endings = Off + +;;;;;;;;;;;;;;;;;;;;;; +; Dynamic Extensions ; +;;;;;;;;;;;;;;;;;;;;;; + +; If you wish to have an extension loaded automatically, use the following +; syntax: +; +; extension=modulename.extension +; +; For example, on Windows: +; +; extension=msql.dll +; +; ... or under UNIX: +; +; extension=msql.so +; +; ... or with a path: +; +; extension=/path/to/extension/msql.so +; +; If you only provide the name of the extension, PHP will look for it in its +; default extension directory. +; +extension=bcmath.so +;extension=bz2.so +;extension=calendar.so +extension=curl.so +;extension=dba.so +;extension=enchant.so +;extension=exif.so +;extension=ftp.so +extension=gd.so +;extension=gettext.so +;extension=gmp.so +extension=iconv.so +;extension=imap.so +;extension=intl.so +;extension=ldap.so +extension=mcrypt.so +extension=mysqli.so +;extension=odbc.so +;zend_extension=opcache.so +;extension=pdo_dblib.so +;extension=pdo_mysql.so +;extension=pdo_odbc.so +;extension=pdo_pgsql.so +;extension=pdo_sqlite.so +;extension=pgsql.so +;extension=pspell.so +;extension=shmop.so +;extension=snmp.so +;extension=soap.so +;extension=sockets.so +;extension=sqlite3.so +;extension=sysvmsg.so +;extension=sysvsem.so +;extension=sysvshm.so +;extension=tidy.so +;extension=xmlrpc.so +;extension=xsl.so +extension=zip.so + +;;;;;;;;;;;;;;;;;;; +; Module Settings ; +;;;;;;;;;;;;;;;;;;; + +[CLI Server] +; Whether the CLI web server uses ANSI color coding in its terminal output. +cli_server.color = On + +[Date] +; Defines the default timezone used by the date functions +; http://php.net/date.timezone +date.timezone = America/Chicago + +; http://php.net/date.default-latitude +;date.default_latitude = 31.7667 + +; http://php.net/date.default-longitude +;date.default_longitude = 35.2333 + +; http://php.net/date.sunrise-zenith +;date.sunrise_zenith = 90.583333 + +; http://php.net/date.sunset-zenith +;date.sunset_zenith = 90.583333 + +[filter] +; http://php.net/filter.default +;filter.default = unsafe_raw + +; http://php.net/filter.default-flags +;filter.default_flags = + +[iconv] +; Use of this INI entry is deprecated, use global input_encoding instead. +; If empty, default_charset or input_encoding or iconv.input_encoding is used. +; The precedence is: default_charset < intput_encoding < iconv.input_encoding +;iconv.input_encoding = + +; Use of this INI entry is deprecated, use global internal_encoding instead. +; If empty, default_charset or internal_encoding or iconv.internal_encoding is used. +; The precedence is: default_charset < internal_encoding < iconv.internal_encoding +;iconv.internal_encoding = + +; Use of this INI entry is deprecated, use global output_encoding instead. +; If empty, default_charset or output_encoding or iconv.output_encoding is used. +; The precedence is: default_charset < output_encoding < iconv.output_encoding +; To use an output encoding conversion, iconv's output handler must be set +; otherwise output encoding conversion cannot be performed. +;iconv.output_encoding = + +[intl] +;intl.default_locale = +; This directive allows you to produce PHP errors when some error +; happens within intl functions. The value is the level of the error produced. +; Default is 0, which does not produce any errors. +;intl.error_level = E_WARNING +;intl.use_exceptions = 0 + +[sqlite3] +;sqlite3.extension_dir = + +[Pcre] +;PCRE library backtracking limit. +; http://php.net/pcre.backtrack-limit +;pcre.backtrack_limit=100000 + +;PCRE library recursion limit. +;Please note that if you set this value to a high number you may consume all +;the available process stack and eventually crash PHP (due to reaching the +;stack size limit imposed by the Operating System). +; http://php.net/pcre.recursion-limit +;pcre.recursion_limit=100000 + +;Enables or disables JIT compilation of patterns. This requires the PCRE +;library to be compiled with JIT support. +;pcre.jit=1 + +[Pdo] +; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off" +; http://php.net/pdo-odbc.connection-pooling +;pdo_odbc.connection_pooling=strict + +;pdo_odbc.db2_instance_name + +[Pdo_mysql] +; If mysqlnd is used: Number of cache slots for the internal result set cache +; http://php.net/pdo_mysql.cache_size +pdo_mysql.cache_size = 2000 + +; Default socket name for local MySQL connects. If empty, uses the built-in +; MySQL defaults. +; http://php.net/pdo_mysql.default-socket +pdo_mysql.default_socket= + +[Phar] +; http://php.net/phar.readonly +;phar.readonly = On + +; http://php.net/phar.require-hash +;phar.require_hash = On + +;phar.cache_list = + +[mail function] +; For Win32 only. +; http://php.net/smtp +SMTP = localhost +; http://php.net/smtp-port +smtp_port = 25 + +; For Win32 only. +; http://php.net/sendmail-from +;sendmail_from = me@example.com + +; For Unix only. You may supply arguments as well (default: "sendmail -t -i"). +; http://php.net/sendmail-path +;sendmail_path = + +; Force the addition of the specified parameters to be passed as extra parameters +; to the sendmail binary. These parameters will always replace the value of +; the 5th parameter to mail(). +;mail.force_extra_parameters = + +; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename +mail.add_x_header = On + +; The path to a log file that will log all mail() calls. Log entries include +; the full path of the script, line number, To address and headers. +;mail.log = +; Log mail to syslog (Event Log on Windows). +;mail.log = syslog + +[SQL] +; http://php.net/sql.safe-mode +sql.safe_mode = Off + +[ODBC] +; http://php.net/odbc.default-db +;odbc.default_db = Not yet implemented + +; http://php.net/odbc.default-user +;odbc.default_user = Not yet implemented + +; http://php.net/odbc.default-pw +;odbc.default_pw = Not yet implemented + +; Controls the ODBC cursor model. +; Default: SQL_CURSOR_STATIC (default). +;odbc.default_cursortype + +; Allow or prevent persistent links. +; http://php.net/odbc.allow-persistent +odbc.allow_persistent = On + +; Check that a connection is still valid before reuse. +; http://php.net/odbc.check-persistent +odbc.check_persistent = On + +; Maximum number of persistent links. -1 means no limit. +; http://php.net/odbc.max-persistent +odbc.max_persistent = -1 + +; Maximum number of links (persistent + non-persistent). -1 means no limit. +; http://php.net/odbc.max-links +odbc.max_links = -1 + +; Handling of LONG fields. Returns number of bytes to variables. 0 means +; passthru. +; http://php.net/odbc.defaultlrl +odbc.defaultlrl = 4096 + +; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char. +; See the documentation on odbc_binmode and odbc_longreadlen for an explanation +; of odbc.defaultlrl and odbc.defaultbinmode +; http://php.net/odbc.defaultbinmode +odbc.defaultbinmode = 1 + +;birdstep.max_links = -1 + +[Interbase] +; Allow or prevent persistent links. +ibase.allow_persistent = 1 + +; Maximum number of persistent links. -1 means no limit. +ibase.max_persistent = -1 + +; Maximum number of links (persistent + non-persistent). -1 means no limit. +ibase.max_links = -1 + +; Default database name for ibase_connect(). +;ibase.default_db = + +; Default username for ibase_connect(). +;ibase.default_user = + +; Default password for ibase_connect(). +;ibase.default_password = + +; Default charset for ibase_connect(). +;ibase.default_charset = + +; Default timestamp format. +ibase.timestampformat = "%Y-%m-%d %H:%M:%S" + +; Default date format. +ibase.dateformat = "%Y-%m-%d" + +; Default time format. +ibase.timeformat = "%H:%M:%S" + +[MySQLi] + +; Maximum number of persistent links. -1 means no limit. +; http://php.net/mysqli.max-persistent +mysqli.max_persistent = -1 + +; Allow accessing, from PHP's perspective, local files with LOAD DATA statements +; http://php.net/mysqli.allow_local_infile +;mysqli.allow_local_infile = On + +; Allow or prevent persistent links. +; http://php.net/mysqli.allow-persistent +mysqli.allow_persistent = On + +; Maximum number of links. -1 means no limit. +; http://php.net/mysqli.max-links +mysqli.max_links = -1 + +; If mysqlnd is used: Number of cache slots for the internal result set cache +; http://php.net/mysqli.cache_size +mysqli.cache_size = 2000 + +; Default port number for mysqli_connect(). If unset, mysqli_connect() will use +; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the +; compile-time value defined MYSQL_PORT (in that order). Win32 will only look +; at MYSQL_PORT. +; http://php.net/mysqli.default-port +mysqli.default_port = 3306 + +; Default socket name for local MySQL connects. If empty, uses the built-in +; MySQL defaults. +; http://php.net/mysqli.default-socket +mysqli.default_socket = + +; Default host for mysql_connect() (doesn't apply in safe mode). +; http://php.net/mysqli.default-host +mysqli.default_host = + +; Default user for mysql_connect() (doesn't apply in safe mode). +; http://php.net/mysqli.default-user +mysqli.default_user = + +; Default password for mysqli_connect() (doesn't apply in safe mode). +; Note that this is generally a *bad* idea to store passwords in this file. +; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw") +; and reveal this password! And of course, any users with read access to this +; file will be able to reveal the password as well. +; http://php.net/mysqli.default-pw +mysqli.default_pw = + +; Allow or prevent reconnect +mysqli.reconnect = Off + +[mysqlnd] +; Enable / Disable collection of general statistics by mysqlnd which can be +; used to tune and monitor MySQL operations. +; http://php.net/mysqlnd.collect_statistics +mysqlnd.collect_statistics = On + +; Enable / Disable collection of memory usage statistics by mysqlnd which can be +; used to tune and monitor MySQL operations. +; http://php.net/mysqlnd.collect_memory_statistics +mysqlnd.collect_memory_statistics = Off + +; Records communication from all extensions using mysqlnd to the specified log +; file. +; http://php.net/mysqlnd.debug +;mysqlnd.debug = + +; Defines which queries will be logged. +; http://php.net/mysqlnd.log_mask +;mysqlnd.log_mask = 0 + +; Default size of the mysqlnd memory pool, which is used by result sets. +; http://php.net/mysqlnd.mempool_default_size +;mysqlnd.mempool_default_size = 16000 + +; Size of a pre-allocated buffer used when sending commands to MySQL in bytes. +; http://php.net/mysqlnd.net_cmd_buffer_size +;mysqlnd.net_cmd_buffer_size = 2048 + +; Size of a pre-allocated buffer used for reading data sent by the server in +; bytes. +; http://php.net/mysqlnd.net_read_buffer_size +;mysqlnd.net_read_buffer_size = 32768 + +; Timeout for network requests in seconds. +; http://php.net/mysqlnd.net_read_timeout +;mysqlnd.net_read_timeout = 31536000 + +; SHA-256 Authentication Plugin related. File with the MySQL server public RSA +; key. +; http://php.net/mysqlnd.sha256_server_public_key +;mysqlnd.sha256_server_public_key = + +[OCI8] + +; Connection: Enables privileged connections using external +; credentials (OCI_SYSOPER, OCI_SYSDBA) +; http://php.net/oci8.privileged-connect +;oci8.privileged_connect = Off + +; Connection: The maximum number of persistent OCI8 connections per +; process. Using -1 means no limit. +; http://php.net/oci8.max-persistent +;oci8.max_persistent = -1 + +; Connection: The maximum number of seconds a process is allowed to +; maintain an idle persistent connection. Using -1 means idle +; persistent connections will be maintained forever. +; http://php.net/oci8.persistent-timeout +;oci8.persistent_timeout = -1 + +; Connection: The number of seconds that must pass before issuing a +; ping during oci_pconnect() to check the connection validity. When +; set to 0, each oci_pconnect() will cause a ping. Using -1 disables +; pings completely. +; http://php.net/oci8.ping-interval +;oci8.ping_interval = 60 + +; Connection: Set this to a user chosen connection class to be used +; for all pooled server requests with Oracle 11g Database Resident +; Connection Pooling (DRCP). To use DRCP, this value should be set to +; the same string for all web servers running the same application, +; the database pool must be configured, and the connection string must +; specify to use a pooled server. +;oci8.connection_class = + +; High Availability: Using On lets PHP receive Fast Application +; Notification (FAN) events generated when a database node fails. The +; database must also be configured to post FAN events. +;oci8.events = Off + +; Tuning: This option enables statement caching, and specifies how +; many statements to cache. Using 0 disables statement caching. +; http://php.net/oci8.statement-cache-size +;oci8.statement_cache_size = 20 + +; Tuning: Enables statement prefetching and sets the default number of +; rows that will be fetched automatically after statement execution. +; http://php.net/oci8.default-prefetch +;oci8.default_prefetch = 100 + +; Compatibility. Using On means oci_close() will not close +; oci_connect() and oci_new_connect() connections. +; http://php.net/oci8.old-oci-close-semantics +;oci8.old_oci_close_semantics = Off + +[PostgreSQL] +; Allow or prevent persistent links. +; http://php.net/pgsql.allow-persistent +pgsql.allow_persistent = On + +; Detect broken persistent links always with pg_pconnect(). +; Auto reset feature requires a little overheads. +; http://php.net/pgsql.auto-reset-persistent +pgsql.auto_reset_persistent = Off + +; Maximum number of persistent links. -1 means no limit. +; http://php.net/pgsql.max-persistent +pgsql.max_persistent = -1 + +; Maximum number of links (persistent+non persistent). -1 means no limit. +; http://php.net/pgsql.max-links +pgsql.max_links = -1 + +; Ignore PostgreSQL backends Notice message or not. +; Notice message logging require a little overheads. +; http://php.net/pgsql.ignore-notice +pgsql.ignore_notice = 0 + +; Log PostgreSQL backends Notice message or not. +; Unless pgsql.ignore_notice=0, module cannot log notice message. +; http://php.net/pgsql.log-notice +pgsql.log_notice = 0 + +[bcmath] +; Number of decimal digits for all bcmath functions. +; http://php.net/bcmath.scale +bcmath.scale = 0 + +[browscap] +; http://php.net/browscap +;browscap = extra/browscap.ini + +[Session] +; Handler used to store/retrieve data. +; http://php.net/session.save-handler +session.save_handler = files + +; Argument passed to save_handler. In the case of files, this is the path +; where data files are stored. Note: Windows users have to change this +; variable in order to use PHP's session functions. +; +; The path can be defined as: +; +; session.save_path = "N;/path" +; +; where N is an integer. Instead of storing all the session files in +; /path, what this will do is use subdirectories N-levels deep, and +; store the session data in those directories. This is useful if +; your OS has problems with many files in one directory, and is +; a more efficient layout for servers that handle many sessions. +; +; NOTE 1: PHP will not create this directory structure automatically. +; You can use the script in the ext/session dir for that purpose. +; NOTE 2: See the section on garbage collection below if you choose to +; use subdirectories for session storage +; +; The file storage module creates files using mode 600 by default. +; You can change that by using +; +; session.save_path = "N;MODE;/path" +; +; where MODE is the octal representation of the mode. Note that this +; does not overwrite the process's umask. +; http://php.net/session.save-path +;session.save_path = "/tmp" + +; Whether to use strict session mode. +; Strict session mode does not accept uninitialized session ID and regenerate +; session ID if browser sends uninitialized session ID. Strict mode protects +; applications from session fixation via session adoption vulnerability. It is +; disabled by default for maximum compatibility, but enabling it is encouraged. +; https://wiki.php.net/rfc/strict_sessions +session.use_strict_mode = 0 + +; Whether to use cookies. +; http://php.net/session.use-cookies +session.use_cookies = 1 + +; http://php.net/session.cookie-secure +;session.cookie_secure = + +; This option forces PHP to fetch and use a cookie for storing and maintaining +; the session id. We encourage this operation as it's very helpful in combating +; session hijacking when not specifying and managing your own session id. It is +; not the be-all and end-all of session hijacking defense, but it's a good start. +; http://php.net/session.use-only-cookies +session.use_only_cookies = 1 + +; Name of the session (used as cookie name). +; http://php.net/session.name +session.name = PHPSESSID + +; Initialize session on request startup. +; http://php.net/session.auto-start +session.auto_start = 0 + +; Lifetime in seconds of cookie or, if 0, until browser is restarted. +; http://php.net/session.cookie-lifetime +session.cookie_lifetime = 0 + +; The path for which the cookie is valid. +; http://php.net/session.cookie-path +session.cookie_path = / + +; The domain for which the cookie is valid. +; http://php.net/session.cookie-domain +session.cookie_domain = + +; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript. +; http://php.net/session.cookie-httponly +session.cookie_httponly = + +; Handler used to serialize data. php is the standard serializer of PHP. +; http://php.net/session.serialize-handler +session.serialize_handler = php + +; Defines the probability that the 'garbage collection' process is started +; on every session initialization. The probability is calculated by using +; gc_probability/gc_divisor. Where session.gc_probability is the numerator +; and gc_divisor is the denominator in the equation. Setting this value to 1 +; when the session.gc_divisor value is 100 will give you approximately a 1% chance +; the gc will run on any give request. +; Default Value: 1 +; Development Value: 1 +; Production Value: 1 +; http://php.net/session.gc-probability +session.gc_probability = 1 + +; Defines the probability that the 'garbage collection' process is started on every +; session initialization. The probability is calculated by using the following equation: +; gc_probability/gc_divisor. Where session.gc_probability is the numerator and +; session.gc_divisor is the denominator in the equation. Setting this value to 1 +; when the session.gc_divisor value is 100 will give you approximately a 1% chance +; the gc will run on any give request. Increasing this value to 1000 will give you +; a 0.1% chance the gc will run on any give request. For high volume production servers, +; this is a more efficient approach. +; Default Value: 100 +; Development Value: 1000 +; Production Value: 1000 +; http://php.net/session.gc-divisor +session.gc_divisor = 1000 + +; After this number of seconds, stored data will be seen as 'garbage' and +; cleaned up by the garbage collection process. +; http://php.net/session.gc-maxlifetime +session.gc_maxlifetime = 1440 + +; NOTE: If you are using the subdirectory option for storing session files +; (see session.save_path above), then garbage collection does *not* +; happen automatically. You will need to do your own garbage +; collection through a shell script, cron entry, or some other method. +; For example, the following script would is the equivalent of +; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes): +; find /path/to/sessions -cmin +24 -type f | xargs rm + +; Check HTTP Referer to invalidate externally stored URLs containing ids. +; HTTP_REFERER has to contain this substring for the session to be +; considered as valid. +; http://php.net/session.referer-check +session.referer_check = + +; Set to {nocache,private,public,} to determine HTTP caching aspects +; or leave this empty to avoid sending anti-caching headers. +; http://php.net/session.cache-limiter +session.cache_limiter = nocache + +; Document expires after n minutes. +; http://php.net/session.cache-expire +session.cache_expire = 180 + +; trans sid support is disabled by default. +; Use of trans sid may risk your users' security. +; Use this option with caution. +; - User may send URL contains active session ID +; to other person via. email/irc/etc. +; - URL that contains active session ID may be stored +; in publicly accessible computer. +; - User may access your site with the same session ID +; always using URL stored in browser's history or bookmarks. +; http://php.net/session.use-trans-sid +session.use_trans_sid = 0 + +; Set session ID character length. This value could be between 22 to 256. +; Shorter length than default is supported only for compatibility reason. +; Users should use 32 or more chars. +; http://php.net/session.sid-length +; Default Value: 32 +; Development Value: 26 +; Production Value: 26 +session.sid_length = 26 + +; The URL rewriter will look for URLs in a defined set of HTML tags. +;
is special; if you include them here, the rewriter will +; add a hidden field with the info which is otherwise appended +; to URLs. tag's action attribute URL will not be modified +; unless it is specified. +; Note that all valid entries require a "=", even if no value follows. +; Default Value: "a=href,area=href,frame=src,form=" +; Development Value: "a=href,area=href,frame=src,form=" +; Production Value: "a=href,area=href,frame=src,form=" +; http://php.net/url-rewriter.tags +session.trans_sid_tags = "a=href,area=href,frame=src,form=" + +; URL rewriter does not rewrite absolute URLs by default. +; To enable rewrites for absolute pathes, target hosts must be specified +; at RUNTIME. i.e. use ini_set() +; tags is special. PHP will check action attribute's URL regardless +; of session.trans_sid_tags setting. +; If no host is defined, HTTP_HOST will be used for allowed host. +; Example value: php.net,www.php.net,wiki.php.net +; Use "," for multiple hosts. No spaces are allowed. +; Default Value: "" +; Development Value: "" +; Production Value: "" +;session.trans_sid_hosts="" + +; Define how many bits are stored in each character when converting +; the binary hash data to something readable. +; Possible values: +; 4 (4 bits: 0-9, a-f) +; 5 (5 bits: 0-9, a-v) +; 6 (6 bits: 0-9, a-z, A-Z, "-", ",") +; Default Value: 4 +; Development Value: 5 +; Production Value: 5 +; http://php.net/session.hash-bits-per-character +session.sid_bits_per_character = 5 + +; Enable upload progress tracking in $_SESSION +; Default Value: On +; Development Value: On +; Production Value: On +; http://php.net/session.upload-progress.enabled +;session.upload_progress.enabled = On + +; Cleanup the progress information as soon as all POST data has been read +; (i.e. upload completed). +; Default Value: On +; Development Value: On +; Production Value: On +; http://php.net/session.upload-progress.cleanup +;session.upload_progress.cleanup = On + +; A prefix used for the upload progress key in $_SESSION +; Default Value: "upload_progress_" +; Development Value: "upload_progress_" +; Production Value: "upload_progress_" +; http://php.net/session.upload-progress.prefix +;session.upload_progress.prefix = "upload_progress_" + +; The index name (concatenated with the prefix) in $_SESSION +; containing the upload progress information +; Default Value: "PHP_SESSION_UPLOAD_PROGRESS" +; Development Value: "PHP_SESSION_UPLOAD_PROGRESS" +; Production Value: "PHP_SESSION_UPLOAD_PROGRESS" +; http://php.net/session.upload-progress.name +;session.upload_progress.name = "PHP_SESSION_UPLOAD_PROGRESS" + +; How frequently the upload progress should be updated. +; Given either in percentages (per-file), or in bytes +; Default Value: "1%" +; Development Value: "1%" +; Production Value: "1%" +; http://php.net/session.upload-progress.freq +;session.upload_progress.freq = "1%" + +; The minimum delay between updates, in seconds +; Default Value: 1 +; Development Value: 1 +; Production Value: 1 +; http://php.net/session.upload-progress.min-freq +;session.upload_progress.min_freq = "1" + +; Only write session data when session data is changed. Enabled by default. +; http://php.net/session.lazy-write +;session.lazy_write = On + +[Assertion] +; Switch whether to compile assertions at all (to have no overhead at run-time) +; -1: Do not compile at all +; 0: Jump over assertion at run-time +; 1: Execute assertions +; Changing from or to a negative value is only possible in php.ini! (For turning assertions on and off at run-time, see assert.active, when zend.assertions = 1) +; Default Value: 1 +; Development Value: 1 +; Production Value: -1 +; http://php.net/zend.assertions +zend.assertions = -1 + +; Assert(expr); active by default. +; http://php.net/assert.active +;assert.active = On + +; Throw an AssertationException on failed assertions +; http://php.net/assert.exception +;assert.exception = On + +; Issue a PHP warning for each failed assertion. (Overridden by assert.exception if active) +; http://php.net/assert.warning +;assert.warning = On + +; Don't bail out by default. +; http://php.net/assert.bail +;assert.bail = Off + +; User-function to be called if an assertion fails. +; http://php.net/assert.callback +;assert.callback = 0 + +; Eval the expression with current error_reporting(). Set to true if you want +; error_reporting(0) around the eval(). +; http://php.net/assert.quiet-eval +;assert.quiet_eval = 0 + +[COM] +; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs +; http://php.net/com.typelib-file +;com.typelib_file = + +; allow Distributed-COM calls +; http://php.net/com.allow-dcom +;com.allow_dcom = true + +; autoregister constants of a components typlib on com_load() +; http://php.net/com.autoregister-typelib +;com.autoregister_typelib = true + +; register constants casesensitive +; http://php.net/com.autoregister-casesensitive +;com.autoregister_casesensitive = false + +; show warnings on duplicate constant registrations +; http://php.net/com.autoregister-verbose +;com.autoregister_verbose = true + +; The default character set code-page to use when passing strings to and from COM objects. +; Default: system ANSI code page +;com.code_page= + +[mbstring] +; language for internal character representation. +; This affects mb_send_mail() and mbstring.detect_order. +; http://php.net/mbstring.language +;mbstring.language = Japanese + +; Use of this INI entry is deprecated, use global internal_encoding instead. +; internal/script encoding. +; Some encoding cannot work as internal encoding. (e.g. SJIS, BIG5, ISO-2022-*) +; If empty, default_charset or internal_encoding or iconv.internal_encoding is used. +; The precedence is: default_charset < internal_encoding < iconv.internal_encoding +;mbstring.internal_encoding = + +; Use of this INI entry is deprecated, use global input_encoding instead. +; http input encoding. +; mbstring.encoding_traslation = On is needed to use this setting. +; If empty, default_charset or input_encoding or mbstring.input is used. +; The precedence is: default_charset < intput_encoding < mbsting.http_input +; http://php.net/mbstring.http-input +;mbstring.http_input = + +; Use of this INI entry is deprecated, use global output_encoding instead. +; http output encoding. +; mb_output_handler must be registered as output buffer to function. +; If empty, default_charset or output_encoding or mbstring.http_output is used. +; The precedence is: default_charset < output_encoding < mbstring.http_output +; To use an output encoding conversion, mbstring's output handler must be set +; otherwise output encoding conversion cannot be performed. +; http://php.net/mbstring.http-output +;mbstring.http_output = + +; enable automatic encoding translation according to +; mbstring.internal_encoding setting. Input chars are +; converted to internal encoding by setting this to On. +; Note: Do _not_ use automatic encoding translation for +; portable libs/applications. +; http://php.net/mbstring.encoding-translation +;mbstring.encoding_translation = Off + +; automatic encoding detection order. +; "auto" detect order is changed according to mbstring.language +; http://php.net/mbstring.detect-order +;mbstring.detect_order = auto + +; substitute_character used when character cannot be converted +; one from another +; http://php.net/mbstring.substitute-character +;mbstring.substitute_character = none + +; overload(replace) single byte functions by mbstring functions. +; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(), +; etc. Possible values are 0,1,2,4 or combination of them. +; For example, 7 for overload everything. +; 0: No overload +; 1: Overload mail() function +; 2: Overload str*() functions +; 4: Overload ereg*() functions +; http://php.net/mbstring.func-overload +;mbstring.func_overload = 0 + +; enable strict encoding detection. +; Default: Off +;mbstring.strict_detection = On + +; This directive specifies the regex pattern of content types for which mb_output_handler() +; is activated. +; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml) +;mbstring.http_output_conv_mimetype= + +[gd] +; Tell the jpeg decode to ignore warnings and try to create +; a gd image. The warning will then be displayed as notices +; disabled by default +; http://php.net/gd.jpeg-ignore-warning +;gd.jpeg_ignore_warning = 1 + +[exif] +; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS. +; With mbstring support this will automatically be converted into the encoding +; given by corresponding encode setting. When empty mbstring.internal_encoding +; is used. For the decode settings you can distinguish between motorola and +; intel byte order. A decode setting cannot be empty. +; http://php.net/exif.encode-unicode +;exif.encode_unicode = ISO-8859-15 + +; http://php.net/exif.decode-unicode-motorola +;exif.decode_unicode_motorola = UCS-2BE + +; http://php.net/exif.decode-unicode-intel +;exif.decode_unicode_intel = UCS-2LE + +; http://php.net/exif.encode-jis +;exif.encode_jis = + +; http://php.net/exif.decode-jis-motorola +;exif.decode_jis_motorola = JIS + +; http://php.net/exif.decode-jis-intel +;exif.decode_jis_intel = JIS + +[Tidy] +; The path to a default tidy configuration file to use when using tidy +; http://php.net/tidy.default-config +;tidy.default_config = /usr/local/lib/php/default.tcfg + +; Should tidy clean and repair output automatically? +; WARNING: Do not use this option if you are generating non-html content +; such as dynamic images +; http://php.net/tidy.clean-output +tidy.clean_output = Off + +[soap] +; Enables or disables WSDL caching feature. +; http://php.net/soap.wsdl-cache-enabled +soap.wsdl_cache_enabled=1 + +; Sets the directory name where SOAP extension will put cache files. +; http://php.net/soap.wsdl-cache-dir +soap.wsdl_cache_dir="/tmp" + +; (time to live) Sets the number of second while cached file will be used +; instead of original one. +; http://php.net/soap.wsdl-cache-ttl +soap.wsdl_cache_ttl=86400 + +; Sets the size of the cache limit. (Max. number of WSDL files to cache) +soap.wsdl_cache_limit = 5 + +[sysvshm] +; A default size of the shared memory segment +;sysvshm.init_mem = 10000 + +[ldap] +; Sets the maximum number of open links or -1 for unlimited. +ldap.max_links = -1 + +[mcrypt] +; For more information about mcrypt settings see http://php.net/mcrypt-module-open + +; Directory where to load mcrypt algorithms +; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt) +;mcrypt.algorithms_dir= + +; Directory where to load mcrypt modes +; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt) +;mcrypt.modes_dir= + +[dba] +;dba.default_handler= + +[opcache] +; Determines if Zend OPCache is enabled +;opcache.enable=1 + +; Determines if Zend OPCache is enabled for the CLI version of PHP +;opcache.enable_cli=0 + +; The OPcache shared memory storage size. +;opcache.memory_consumption=128 + +; The amount of memory for interned strings in Mbytes. +;opcache.interned_strings_buffer=8 + +; The maximum number of keys (scripts) in the OPcache hash table. +; Only numbers between 200 and 1000000 are allowed. +;opcache.max_accelerated_files=10000 + +; The maximum percentage of "wasted" memory until a restart is scheduled. +;opcache.max_wasted_percentage=5 + +; When this directive is enabled, the OPcache appends the current working +; directory to the script key, thus eliminating possible collisions between +; files with the same name (basename). Disabling the directive improves +; performance, but may break existing applications. +;opcache.use_cwd=1 + +; When disabled, you must reset the OPcache manually or restart the +; webserver for changes to the filesystem to take effect. +;opcache.validate_timestamps=1 + +; How often (in seconds) to check file timestamps for changes to the shared +; memory storage allocation. ("1" means validate once per second, but only +; once per request. "0" means always validate) +;opcache.revalidate_freq=2 + +; Enables or disables file search in include_path optimization +;opcache.revalidate_path=0 + +; If disabled, all PHPDoc comments are dropped from the code to reduce the +; size of the optimized code. +;opcache.save_comments=1 + +; If enabled, a fast shutdown sequence is used for the accelerated code +; Depending on the used Memory Manager this may cause some incompatibilities. +;opcache.fast_shutdown=0 + +; Allow file existence override (file_exists, etc.) performance feature. +;opcache.enable_file_override=0 + +; A bitmask, where each bit enables or disables the appropriate OPcache +; passes +;opcache.optimization_level=0xffffffff + +;opcache.inherited_hack=1 +;opcache.dups_fix=0 + +; The location of the OPcache blacklist file (wildcards allowed). +; Each OPcache blacklist file is a text file that holds the names of files +; that should not be accelerated. The file format is to add each filename +; to a new line. The filename may be a full path or just a file prefix +; (i.e., /var/www/x blacklists all the files and directories in /var/www +; that start with 'x'). Line starting with a ; are ignored (comments). +;opcache.blacklist_filename= + +; Allows exclusion of large files from being cached. By default all files +; are cached. +;opcache.max_file_size=0 + +; Check the cache checksum each N requests. +; The default value of "0" means that the checks are disabled. +;opcache.consistency_checks=0 + +; How long to wait (in seconds) for a scheduled restart to begin if the cache +; is not being accessed. +;opcache.force_restart_timeout=180 + +; OPcache error_log file name. Empty string assumes "stderr". +;opcache.error_log= + +; All OPcache errors go to the Web server log. +; By default, only fatal errors (level 0) or errors (level 1) are logged. +; You can also enable warnings (level 2), info messages (level 3) or +; debug messages (level 4). +;opcache.log_verbosity_level=1 + +; Preferred Shared Memory back-end. Leave empty and let the system decide. +;opcache.preferred_memory_model= + +; Protect the shared memory from unexpected writing during script execution. +; Useful for internal debugging only. +;opcache.protect_memory=0 + +; Allows calling OPcache API functions only from PHP scripts which path is +; started from specified string. The default "" means no restriction +;opcache.restrict_api= + +; Mapping base of shared memory segments (for Windows only). All the PHP +; processes have to map shared memory into the same address space. This +; directive allows to manually fix the "Unable to reattach to base address" +; errors. +;opcache.mmap_base= + +; Enables and sets the second level cache directory. +; It should improve performance when SHM memory is full, at server restart or +; SHM reset. The default "" disables file based caching. +;opcache.file_cache= + +; Enables or disables opcode caching in shared memory. +;opcache.file_cache_only=0 + +; Enables or disables checksum validation when script loaded from file cache. +;opcache.file_cache_consistency_checks=1 + +; Implies opcache.file_cache_only=1 for a certain process that failed to +; reattach to the shared memory (for Windows only). Explicitly enabled file +; cache is required. +;opcache.file_cache_fallback=1 + +; Enables or disables copying of PHP code (text segment) into HUGE PAGES. +; This should improve performance, but requires appropriate OS configuration. +;opcache.huge_code_pages=1 + +; Validate cached file permissions. +;opcache.validate_permission=0 + +; Prevent name collisions in chroot'ed environment. +;opcache.validate_root=0 + +[curl] +; A default value for the CURLOPT_CAINFO option. This is required to be an +; absolute path. +;curl.cainfo = + +[openssl] +; The location of a Certificate Authority (CA) file on the local filesystem +; to use when verifying the identity of SSL/TLS peers. Most users should +; not specify a value for this directive as PHP will attempt to use the +; OS-managed cert stores in its absence. If specified, this value may still +; be overridden on a per-stream basis via the "cafile" SSL stream context +; option. +;openssl.cafile= + +; If openssl.cafile is not specified or if the CA file is not found, the +; directory pointed to by openssl.capath is searched for a suitable +; certificate. This value must be a correctly hashed certificate directory. +; Most users should not specify a value for this directive as PHP will +; attempt to use the OS-managed cert stores in its absence. If specified, +; this value may still be overridden on a per-stream basis via the "capath" +; SSL stream context option. +;openssl.capath= + +; Local Variables: +; tab-width: 4 +; End: diff --git a/states/roles/maintain/pass/temp-repo.conf b/states/roles/maintain/pass/temp-repo.conf new file mode 100644 index 0000000..688aabc --- /dev/null +++ b/states/roles/maintain/pass/temp-repo.conf @@ -0,0 +1,3 @@ +[teampass-temp] +SigLevel = Never +Server = http://pkg.actcur.com/$repo/os/$arch diff --git a/states/roles/maintain/pkg-cache/pkg-cache.conf b/states/roles/maintain/pkg-cache/pkg-cache.conf index 4e55d75..311ff10 100644 --- a/states/roles/maintain/pkg-cache/pkg-cache.conf +++ b/states/roles/maintain/pkg-cache/pkg-cache.conf @@ -12,6 +12,10 @@ server location ~ aur-local\.(db|sig){ try_files $uri @pkg_mirror; } + #TEMPORARY. Requests for teampass.db and sig files should stay here + location ~ teampass-temp\.(db|sig){ + try_files $uri @pkg_mirror; + } # Requests for package db and signature files should redirect upstream without caching location ~ \.(db|sig)$ { diff --git a/states/systems/core/backup/disable.sls b/states/systems/core/backup/disable.sls new file mode 100644 index 0000000..7a2cfd3 --- /dev/null +++ b/states/systems/core/backup/disable.sls @@ -0,0 +1,5 @@ +disable_backups: + grains.present: + - name: backups_enabled + - value: false + - force: true diff --git a/states/systems/core/backup/enable.sls b/states/systems/core/backup/enable.sls new file mode 100644 index 0000000..7ff6c0a --- /dev/null +++ b/states/systems/core/backup/enable.sls @@ -0,0 +1,5 @@ +enable_backups: + grains.present: + - name: backups_enabled + - value: true + - force: true diff --git a/states/systems/core/backup/init.sls b/states/systems/core/backup/init.sls index f6dc87b..07f19ca 100644 --- a/states/systems/core/backup/init.sls +++ b/states/systems/core/backup/init.sls @@ -1,4 +1,5 @@ + {%- if 'backup' in pillar['grains']['roles'] -%} {%- else -%} {##ensure that backup pillar exists##} @@ -52,6 +53,9 @@ backup_host.actcur.com: rsync_{{ name }}: pkg.installed: - name: rsync + {##only run if backups are enabled##} + {%- if grains['backups_enabled'] is defined -%} + {%- if grains['backups_enabled'] == true %} backup_dir_{{ name }}: cmd.run: - name: "ssh {{ name }} 'mkdir -p /mnt/butter/backups/configurations/{{ name }}/latest'" @@ -61,6 +65,8 @@ backup_{{ name }}: - source: {{ pillar['backup'][name]['location'] }}/ - delete: true - force: true + {%- endif -%} + {%- endif -%} {%- endif -%} {%- endfor %} {%- endif %} diff --git a/states/restore/init.sls b/states/systems/core/backup/restore.sls similarity index 100% rename from states/restore/init.sls rename to states/systems/core/backup/restore.sls diff --git a/states/top.sls b/states/top.sls index 640419c..a6cbb09 100644 --- a/states/top.sls +++ b/states/top.sls @@ -13,7 +13,7 @@ '*': - update - basepkgs - - roles + - grains - systems.core.firewalld - systems.core.mount - systems.core.git diff --git a/states/update/init.sls b/states/update/init.sls index 05c9ce3..5657e44 100644 --- a/states/update/init.sls +++ b/states/update/init.sls @@ -1,3 +1,9 @@ update: pkg.uptodate: - refresh: True + +{% if grains['os_family'] == 'Arch' %} +clear_pkg_cache: + cmd.run: + - name: "pacman -Sc --noconfirm" +{% endif %}